Basic Info.
Product Description
The 2024 aluminum alloy is a high-strength, heat-treatable aluminum alloy that belongs to the 2000 series. It is commonly used in aerospace, aviation, and structural applications. Here is some information about 2024 aluminum sheet:
Composition: The 2024 alloy primarily consists of aluminum (Al), copper (Cu), and small amounts of other elements. It typically contains approximately 90.7% to 94.7% aluminum, 3.8% to 4.9% copper, 0.3% to 0.9% manganese (Mn), and trace amounts of other elements such as iron (Fe), silicon (Si), and magnesium (Mg).
Strength: The 2024 aluminum sheet offers excellent strength-to-weight ratio, making it suitable for applications where high strength is required. It has a tensile strength ranging from 290 MPa (42,000 psi) to 505 MPa (73,000 psi) depending on the temper.
Heat Treatment: The 2024 aluminum sheet can be heat-treated to enhance its mechanical properties. It can be solution heat treated and aged (precipitation hardened) to improve its strength and hardness.
Formability: The 2024 alloy sheet has fair to good formability, allowing it to be worked into various shapes through processes such as bending, rolling, and deep drawing. However, it is not as easily formable as some other aluminum alloys.
Corrosion Resistance: The 2024 alloy is not as corrosion-resistant as some other aluminum alloys, especially in environments with high levels of moisture and chloride. To mitigate corrosion, protective coatings or treatments are often applied.
Applications: The 2024 aluminum sheet is commonly used in aerospace and aviation industries for structural components, aircraft fittings, and hardware. It is also utilized in other applications that require high strength-to-weight ratio and good fatigue resistance, such as bicycle frames, automotive components, and sporting equipment.
Please note that the specific properties, dimensions, and availability of the 2024 aluminum sheet may vary depending on the manufacturer and supplier. If you are considering this alloy for a specific application, I recommend consulting with aluminum suppliers or manufacturers who can provide you with detailed information on its properties, availability, and suitability for your specific needs.
Aluminum Sheet/ Aluminum Plate Available Sizes & Specifications: | Thickness | 0.1mm - 6.0mm (Aluminum Sheet) | |
| 6.0mm - 600mm (Aluminum Plate) | ||
| Width | 1000mm - 2800mm | |
| Length | Up to 16m | |
| Temper | O, H12, H22, H32, H14, H24, H34, H16, H26, H36, H18, H28, H38, H19, H25, H27,H111, H112,H241, H332, T3, T4, T5, T6, T651, T3651, T451, T42, T62 etc. | |
| Surface Treatment | Mill Finished, Anodized, Embossed, PVC Coated, etc | |
| 1000 Series | 1050 | Insulation, food industry, decoration, lamp, traffic signs, etc. |
| 1060 | Fan blade, Lamps and lanterns, Capacitor shell, Auto parts, Welding parts. | |
| 1070 | Capacitor, Rear panel of vehicle refrigerator, charging point, heat sink, etc | |
| 1100 | Cooker, building material, printing, heat exchanger, bottle cap, etc | |
| 2000 Series | 2A12 | Aircraft structures, rivets, aviation, machinery, missile components, the card wheel hub, propeller components, aerospace parts,car parts and various other structural parts. |
| 2014 | ||
| 2024 | ||
| 2017 | ||
| 3000 Series | 3003 | Aluminum curtain wall panel, aluminum Ceiling, Electric cooker bottom, TV LCD backboard, storage tank, curtain wall, building construction panel heat sink, billboard. Industrial floor, air conditioning, refrigerators radiators, Make-up board, Prefabricated house etc. |
| 3004 | ||
| 3005 | ||
| 3104 | ||
| 3105 | ||
| 5000 Series | 5005 | Marine applications, bodies of boats, buses, trucks, and trailers. Curtain wall panel. |
| 5052 | Marine and transportation material, railway carriage's inner and outer cabinet, oil and chemical industry storage devices, equipment and medical device panel, etc. | |
| 5083 | Tanker, oil storage tank, drilling platform, shipboard, deck, bottom, welded parts and edge panel, railway carriage's board, automotive and aircraft panel, cooling device, and automotive molding, etc. | |
| 5086 | ||
| 5182 | ||
| 5252 | ||
| 5454 | ||
| 5754 | Tanker body, marine facilities, pressure container, transportation etc. | |
| 6000 Series | 6005 | Railway inside and outside parts, board, and bed plate. Industry molding Highly stressed applications include Roofing construction, transportation, and marine as well as mold. Auto parts, architectural fabrication, window and door frames, aluminum furniture, electronic components as well as various consumer durable products. |
| 6060 | ||
| 6061 | ||
| 6063 | ||
| 6082 | ||
| 6101 | ||
| 7000 Series | 7005 | Truss, rod/bar, and the container in transportation vehicles; Large-sized heat exchangers. |
| 7050 | Molding (bottles) mode, ultrasonic plastic welding mold, golf head, shoe mold, paper and plastic molding, foam molding, lost wax mold, templates, fixtures, machinery and equipment. | |
| 7075 | Aerospace industry, military industry, electronic etc. | |
1. Thickness: 0.1mm to 3.0mm
2. Width: Upto 2000mm
3. Lenth: as the requirement
4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*3000
5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc
7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Technique: DC/CC
10. Anodized: Available
1. Thickness: 3.0mm to 600mm
2. Width: Upto 2800mm
3. Lenth: as the requirement
4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*3000
5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc
7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Technique: DC/CC
10. Anodized: Available
11. Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.
1. Thickness: 0.3mm to 6.0mm
2. Width: Upto 1500mm
3. Lenth: as the requirement
4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*3000
5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mirror polished with PVC coating, silver finish
7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Pattern: 1 bar, 2 bars, five bars, lentils, willow leaf, or diamond pattern
10. Theoretical Weight: Plus 0.6kg/sqm
11. Material: 1050, 1060, 1100, 3003, 3105, 4017, 5052, 5083, 5086, 5754, 6061, 6063
1. Thickness: 0.1mm to 3.0mm
2. Diameter: Upto 600mm
3. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc
6. Surface: mill finish, anodized, etc
7. Temper: O, H12, H14, H22, H24, etc.
8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report
9. Technique: DC/CC(DC For cookware and CC for road sign)
10. Anodized: Available
11. Material Grade : 1050, 1060, 1100, 3003, 3004, 3105
Q: What kind of ZYTC company?
A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.
Q: What certificate does ZYTC have?
A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.
Q: What's your purchasing system?
A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.
Q: Who are your cooperate partners?
A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, etc.
Q: What are your company's payment methods?
A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices.
Q: Can you accept small orders?
A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.
Q: Do you guarantee the safe and reliable delivery of products?
A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.
Q: Does ZYTC provide processing services?
A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.
Q: How to guarantee the quality?
A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.
Q: What if there is a quality problem?
A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.
Q: Can you provide samples?
A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.
Q: How about the delivery time?
A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
