Basic Info.
Product Description
Feature:
*The laser can be carved including: Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam
Paper/Anodized Aluminum/Ceramics/Stone/Stainless steel
*Can Not Engrave:Metal/Glass/PCB/Reflective Material/Transparent Material
*We have a 15W Laser, which can engrave metal materials such as stainless steel and alumina.
*The blade can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material
*ER11 needs shrink fitting. Both the spindle and ER11 have the correct diameter, but ER11 is designed to be minus tolerence to spindle so you cannot put it on directly.
*Offline controller supports offline work, you will not need to connect to a computer
*We have EU and US adapters and I will send the correct plugs according to your country.
*If you need any question,feel free to contact me.
| Model | CNC3018PRO |
| Working area | 300*180*43mm |
| Frame size | 410*354*277mm |
| Material | Aluminum+Bakelite |
| Spindle | 775 spindle motor(12-36V) 24V:10000r/min |
| Step motor | 42HS34 1.3A, 12V.Torque 0.25N/M |
| Power supply | 24V 5A |
| Softwalre | GRBL1.1 controller |
| Driving Units | T8-2-4 Screw drive |
| Support System | WindowsXP;Windows7 32/64 bits; Windows8;Windows10 |
| Drill bits | Tip0.1 mm; 30degrees; Diameter 3.175 mm |
| Adapted laser | 500mW/2500mW/3500mW/5500mW/15000mW(33mm) |
| Package List | Cutters+ER11 +4* plates |
| Package Size | 580*470* 120mm |
| Package weight | 8KG |
Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included in the kit.
Q: Are there software and instructions can I get it?
A:You can get the software ,contact us.
Q: Whick type computer system can run its software?
A:The software only support the Windows system.
Q: What's the laser's lifetime?
A: The laser module have over 6,000 hours lifetime.
Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber.
Q:What material can it cut?
A:cork wood, paper, thin leather.
Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool down(about half of an hour), then start work again. Long time work continuously with shorten the laser module liftetime.
Q: When I receive it, how to let it work?
A: Fist of all, you need to plug the stepper motor power cable to the controller board, then installl the software and the driver, power supply the machine,that's all.
